Home > Fluid Level Meter >

KVS100 Series Big Connection Vibrating Fork Level Switch G1 - 1/2" 170mm

Product Categories

Fluid Level Meter [931]
Water Quality Sensor [568]
Precision Pressure Sensor [260]
Radar Level Transmitter [186]
Ultrasonic Transducer Sensor [227]
Ultrasonic Flow Meter [117]
Electromagnetic Flow Meter [66]
Electronic Gyroscope Sensor [288]
Inclinometer Sensor [19]
Accelerometer Sensor [212]
Load Cell Sensor [19]
Turbine Flow Meter [141]
Vortex Flow Meter [81]
Coriolis Mass Flow Meter [110]
Ultrasonic Water Meter [23]
Wireless Pressure Transmitter [25]
Wire Rope Vibration Isolator [107]
Precision Digital Pressure Gauge [54]
Gas Detector Sensor [364]
Laser Sensors [66]
Oxygen Concentrator [12]

Xi'an Kacise Optronics Co.,Ltd.

Trust Seal

Verified Supplier

Credit Check

Supplier Assessment

Contact Now

KVS100 Series Big Connection Vibrating Fork Level Switch G1 - 1/2" 170mm

Name: KVS100 Series Big Connection Vibrating Fork Level Switch G1 12quot 170mm
Brand: Kacise
Price: 1 USD

China KVS100 Series Big Connection Vibrating Fork Level Switch G1 - 1/2" 170mm wholesale

Brand Name : Kacise

Model Number : KVS140

Place of Origin : China

MOQ : 1

Price : Negotiable

Payment Terms : L/C, D/A, D/P, T/T, Western Union, MoneyGram

Supply Ability : 100+

Delivery Time : 5-8 work days

Packaging Details : carton

Controller Casing Material : Aluminum alloy (IP65)

Power Supply : 22-60VDC, 22-220VAC, 50/60Hz

Power Consumption : DC-3W (MAX), AC-15W (MAX)

Output : DPDT 5A/250VAC or NPN/PNP

Operating Pressure : -1-40bar

Installation : vertical or horizontal

Contact Now

KVS100 Series Vibrating Fork Liquid / Solid Level Switch

Introduction

KVS100 series tuning fork level switch is a new type of level switch. It is designed and manufactured using the principle of tuning fork vibration. It is the base of the induction rod of the tuning fork level switch. The tuning fork is driven by the piezoelectric wafer, and the vibration signal is received by another piezoelectric wafer, so that the vibration signal can be circulated and the induction rod resonates. When the material contacts the sensor bar, the vibration signal gradually becomes smaller, and the control circuit outputs an electrical acceptance signal until the resonance stops.

Due to the natural principle that the sensitivity of the sensing rod gradually decreases from the front end to the rear seat, no error signal will be generated when the material in the tank and the barrel are stacked upwards, touching the base of the sensing rod (rear) or discharging.

The tuning fork generates mechanical vibrations under the excitation of a piezoelectric crystal, and the vibration has a certain frequency and amplitude. When the tuning fork is submerged by liquid or solid, the vibration frequency and amplitude of the tuning fork will change. This frequency change is detected by the electronic circuit and outputs a switching signal.

Principle

The KVS100 series vibration fork type/level switch uses a piezoelectric component to generate a vibration wave. When the measured medium contacts the fork body,the frequency of the amplitude of the tuning fork is changed, and the change isdetected by the intelligent control circuit and converted into a corresponding output signal. Such as: (Realy.NPN.PNP)

Features

Customized length can reach 3m
DPDP SPDT Relay / NPN / PNP output
20~250VAC / VDC, 50/60Hz
Whole metal construction, sturdy and durable.
Self-study function. It can study different medium density by using buttons.
The vibration amplitude of the fork is large, and the amplitude can reach more than 10mm, which can shake off the low-viscosity local hanging material on the induction rod to prevent malfunction.
Bright red LED warning light.
For liquid, powder, granule, thick medium measurement.

Parameters

Item	Specification
Controller Casing Material	Aluminum alloy (IP65)
Power Supply	22-60VDC, 22-220VAC, 50/60Hz
Power Consumption	DC-3W (MAX), AC-15W (MAX)
Output	DPDT 5A/250VAC or NPN/PNP
Operating Pressure	-1-40bar
Installation	vertical or horizontal

KVS100 Series Big Connection Vibrating Fork Level Switch G1 - 1/2" 170mm

Model	KVS140 big fork body type
Connection	G1-1/2” (customizable)
Rod Material	SUS304 / 316
Operating Temperature	-40℃~130℃
Insertion Length	170mm(customizable)

Ordering Information

KVS
	Model
	140	big fork body type
		Power and Output
		Code	Power Supply
		A	224VDC-220VAC relay output
		B	(NPN PNP transistor output)
			Code	Connection	Code	Size
			A	3/4” (20A)	M	5Kg/cm²
			B	1” (25A)	N	10Kg/cm²
			C	1-1/2” (40A)	O	150Lbs
			D	2” (50A)	P	300Lbs
			E	2-1/2” (65A)	Q	PT
			F	3” (80A)	R	PF (G)
			G	4” (100A)	T	NPT
			H	5” (125A)	U	sanitary joint
			I	6” (150A)	W	PN1.0
			S	customize	X	PN1.0
					Y	PN1.0
					Z	PN1.0
					S	customize
				Rod Length (mm)
Note: 1. The total length of the product is affected by the function adjustment, and the tolerance is ±5mm. 2. Features, specifications and dimensions could be modified when necessary without prior notice.

Product Tags: